Thursday - July 29/2010.

Metal Detector / Treasure / Users?Guide FG80

Congratulations! The instrument you have just bought, is the result of many years of research in our lab and test field. Before starting any prospecting or field trips which incur expense we recommend you read this Instruction Manual carefully.

It is important to fully understand that all elements, metals or other substances buried under the ground for many years, generate phenomena which interact with the electrostatic field of the Earth.

A good understanding of the instrument, its behaviour, the way to make a diagnosis and interpret the instrument readings is important for the detectorist before starting to prospect. Learn how to replace batteries and bring a replacement set with you just in case.

Choose carefully the stories, legends, and places that you will follow-up, or where you suppose there is gold or treasure hidden or buried.

Remember, the substance detector will only signal if there really is something in the area where you are working.

Top

Long Distance Detection with electronic circuitry is a brand new technology.
It is an invention brought to the world public by mineoro?/span> Ind?tria Eletr?ica Ltda.

In Brazil. Contacts and information about Directional Detectors can be seen on this site, through the email mineoro@mineoro.com or telephones: 55 48 9982 5945 / 55 48 3254 3978 or requested via fax 55 48 3254 8810.

Detection by Ions and Static Electricity.

Ions are modified atoms, when an atom gains one electron it is called a NEGATIVE ION, and when an electron is removed from an atom it becomes a POSITIVE ION.

Static electricity was defined by a German scientist. It is a process that separates the negative electric charges from the positive electric charges by means of a mechanical action. We have all seen and listened to stories about people who felt a strong shock when touching car doors or other metallic objects. This is an electric shock originated in Static electricity. This electricity is always present in materials called Insulating Materials.

Capacitors used in electronic equipment like televisions, radios, computers and in all the universe of electric and electronic circuitry, are devices which store electrostatic charges. Static electricity is produced also by contact, impact, rupture, separation or friction, in all the states of matter: solid, gaseous, liquid and plasmatic.

In long range directional detectors the ionic fields are detected through electrostatic fields generated by the Earths rotation. Ionic fields use electrostatic fields as paths - an invisible wire - to move through space, in all cardinal points.

The propagation is not linear in amplitude, changing from North, South, East and West. The loss of atomic weight liberates atoms from the matter in infinitesimal values. This phenomenon is not measurable.

These atoms, in our particular case, NEGATIVE ATOMS, are detectable in the IONIC CHAMBER of the detector. For substance classification to occur, a polarized field of the same substance is generated inside the IONIC CHAMBER.

Model FG80 Directional Detector with Classifier, detects at long distance and great depth.

See our site - www.mineoro.com - for reports of many treasure hunters who found objects buried at long distances and great depths.

Top

a - Place the detector in the horizontal or vertical position, holding it with your right hand by the transportation handle.

---

b - Before switching on the detector turn the Knob - 2 Sensivity - to the left up to position - 000.

---

c - Switch ON the detector by placing the - 1 Power - key in the - On - position.

---

d - Battery Test Press the - Battery Test Display - button. The display shows the battery charge. When it shows 12 volts, replace the whole set of batteries.

Top

e - Turn knob - 2 Sensivity - to the right until you hear the beep, reverse a figure or more until the beep stops.

---

f - If when switching on the detector, it does not stop beeping, it is because it can be near or under high tension wires or electric fields or because there is very intense atmospheric discharge. In this case, diminish the sensitivity by slowly reversing knob ?2 Sensitivity till the beep stops.

Top

g - Move the detector from right to left and vice-versa as shown in the drawing. Walk at normal pace and always in the NORTH/SOUTH direction. If you hear a beep sound it means something has been detected. The detector does not emit false readings.

h - Why is it necessary to search or prospect in the NORTH/SOUTH? Look at the drawing below. The projection area of irradiated lines has an elliptical shape like an egg.

Observe the greatest distance of irradiated lines is in the North direction. The shortest distance is in the South direction. The East-West lines are a bit bigger than those of the South.

Top

i - Walk towards the direction where the detector beeps indicating some buried object. See animation on our site www.mineoro.com

---

j - With the detector in the horizontal.

Use the detector with the antenna facing down.
Draw a cross, to identify the exact point.

When the ionic field is weak, determine the center by holding the detector close to the ground.

Top

k - Diminish the sensitivitiy turning knob ?2 Sensitivity ?to the left while you walk in the direction of the place where the detector indicates there is a buried object.

---

l - If when getting nearer you lose the beeps, turn the knob ?2 Sensitivity ?to the right until you hear the beep again.

Top

m - Mount the detector in the support to determine the depth.
Place the detector well over the marked center, placing it in the North/South position.

The extension of the support must point to the center.

n - The detectorist must walk away from the detector slowly in the north direction, moving the support until hearing the beep from the detector.

Use a measuring tape to measure the distance between the center and the marked point from the extension of the support as shown in pic.

The distance between the two points is the same as the depth.

Top

o - Mount the detector in the support to determine the depth. The detectorist must place the detector approximately 15.75in/40cm to 19.69in/50cm from the marked center. The antenna must remain pointing towards the marking. p - With the Center & Deep?/span>, begin the procedure of measuring the depth starting from the marked center. q - The detectorist must walk away slowly in the north direction, moving the center & deep in the longitudinal (in the same line) of the ionic chamber and the marked center until hearing a beep in the detector. At this place confirm the exact point moving in x.

The distance between the two points is the same as the depth.

Top

After determining the center and the depth of the object, start the procedure to recover the object. You must take special care when digging, to avoid damaging or even losing the object, especially if it is too small. r - Start digging carefully, placing the earth in a clean area. s - Use a measuring tape to measure the hole, taking extra care not to exceed the determined depth.

---

t - When arriving 1.96in/5cm or 3.93in/10cm before the determined depth, place the last spadeful in a clean separated area.

---

u - With a handheld detector or with your own hands, look for the object.

Top

v - Switch the detectors Power key to ON.

---

x - Press the Battery Test Display button. The Display will show that the batteries are new and fully charged.

---

y - When the voltage decreses to 12 Volts it is necessary to replace all the batteries.

Top

z - When the voltage decreases to 12 Volts it is necessary to replace all the batteries. To replace the batteries , unscrew the battery socket lid of the battery compartment.

---

Remove the lid. Inside the socket there are: ?02 6- batteries-pack of 1,5V AA each. ?01 9V alkaline battery.

---

For better prospecting replace all the batteries when flat.
Verify that the polarities (+) and (-) are in the proper position. They could leak acid if misplaced.

Always use alcaline batteries. They last longer and do not leak so easily.

Top

Model	Long Distance Directional Substances Detector.
Detection System	Ionic Directional Classifier. Ionic/electrostatic fields.
Detection Distance	From a few inches to 10.900yd / 10km or more, depending on the model.
Depth	From surface to 656ft / 200m or more.
Power Source	12 batteries x 1.5V AA - Alkaline. 01 battery x 9V - Alkaline. - IMPORTANT: DO NOT USE RECHARGEABLE BATTERIES
Size	Length 7in/19cm - Width 9in/23cm - Height 12in/31cm.
Weight	3.31lb / 1.5kg
Metals	Natural gold or treasures with continued beeps. Also detects small objects with alternated beeps. Eventually silver and copper or alloys.

Top

The performance of this model is proportional to the percentage of relative air humidity. The lower the humidity the better the detection.

Item	Percentage %	Classification	Informations
1	10% to 30%	OPTIMUM	It detects farther. Very good for small objects and nuggets.
2	31% to 55%	GOOD	It detects from far, though the distance diminishes a little.
3	56% to 65%	MEDIUM	It detects at less distance.
4	66% to 83%	HIGH	The distance diminishes almost 50% or more and is proportional to the percentage of increase of relative humidity of the air.

Top

These instructions are a summary of directions about the instruments operation. The research field is vast and involves several different complex aspects. It would be impossible to explain the whole phenomena in a few lines.

Top

Tel: 55 48 3254 8800 - Telephone Operator Tel: 55 48 3254 3978 - Patricia (english)

Tel: 55 48 3254 8810 - Monica (spanish) Cel: 55 48 9982 5945 - Patricia (english)